sort by
approximate search
1shortlisttitle datasearch history  
results search [or] ISN:000000003859321X | 1 hits
0000 0000 3859 321X
Chin, B. A.
Chin, Bryan Allen
Creation class: 
Creation role: 
Related names: 
Dept. of Materials Science and Engineering, Stanford University
Amorphous magnetoelastic sensors for the detection of biological agents
Analysis of the Creep Properties of a 12Cr--1Mo--W--V Steel, An
Application of Conductive Poly (3-Hexylthiophene) Thin Film for Hydrazine-Sensitive Chemiresistor, The
Application of the Hart Mechanical Equation-of-State to Stress Rupture Correlations
Austenitizing and microstructure of a HT-9 steel
Automatic Single V-Groove Welding Utilizing Infrared Images for Error Detection and Correction
Braze joints of dispersion strengthened copper
Brazing of a dispersion strengthened copper alloy
Cavity Microstructure and Kinetics During Gas Tungsten Arc Welding of Helium-Containing Stainless Steel
Comparison of the In-Reactor Creep of Selected Ferritic, Solid Solution Strengthened, and Precipitation Hardened Commercial Alloys
Control of the welding process using infrared sensors
Creep and diffusional processes in ... 1976
Creep and diffusional processes in Al-Zn binary solid-solution alloys
Creep of Nb--1Zr to Stainless Steel Transition Joint
CuAlPd alloys for sensor and actuator applications
Degradation of refractory metal carbides by hot hydrogen
Design and characterization of a magnetoelastic sensor for the detection of biological agents
Design and Use of Nonstandard Tensile Specimens for Irradiated Materials Testing
Detecting insect infestation with poly3-hexylthiophenethin thin film sensor
Detection of Bacillus anthracis spores in liquid using phage-based magnetoelastic micro-resonators
Detection of Salmonella typhimurium in fat free milk using a phage immobilized magnetoelastic sensor
Detection of Salmonella typhimurium using phage-based magnetostrictive sensor
Detection of Salmonella typhimurium using polyclonal antibody immobilized magnetostrictive biosensors
Development of highly sensitive handheld device for real-time detection of bacteria in food
Development of the Climb Induced Glide Concept to Describe In-Reactor Creep of fcc Materials
Direct detection of Salmonella typhimurium on fresh produce using phage-based magnetoelastic biosensors.
effect of annealing and gold deposition on the performance of magnetoelastic biosensors, The
Effect of composition on the fatigue failure behavior of vanadium alloys
Effect of Heat Treatment on the Impact Properties of a 12Cr--1Mo--V--W Steel, The
Effect of Irradiation on Failure Mode During Creep
Effect of Minor Tramp Elements on Temperature Distributions of the Molten Pool, The
effect of salt and phage concentrations on the binding sensitivity of magnetoelastic biosensors for Bacillus anthracis detection., The
effect of strain rate on the yield behavior of iron-base LRO alloys at elevated temperatures, The
Effects of Boron and Heat Treatment on Structure of Dual-Phase Ti--TiC
Effects of Simultaneous Boron and Nitrogen Implantation on Microhardness and Fatigue Properties of Fe--13Cr--15Ni Alloys
Effects of surface functionalization on the surface phage coverage and the subsequent performance of phage-immobilized magnetoelastic biosensors
Electrotransport and radiation effects in alumina insulators during high temperature reactor applications
Fatigue failure analysis of V-4Ti-4Cr alloy
Fracture Predictions in Zircaloy Fuel Cladding
Gradient Technique for Dynamic Bead Width Control in Robotic Gas Tungsten Arc Welding
GTAW penetration control using a point infrared sensor
Hafnium carbide structural foams synthesized from polymer precursors.
Helium-Induced Weld Cracking in Austenitic and Martensitic Steels
Helium-induced weld degradation of HT-9 steel
Helium induced weldability degradation in an austenitic stainless steel
In-Reactor Creep Correlation for 20% Cold Worked AISI 316 Stainless Steel, An
In-Reactor Creep of Selected Ferritic, Solid Solution Strengthened and Precipitation Hardened Alloys, The
In Situ Fatigue Crack Propagation Experiment, An
Influence of a temperature change on in-reactor creep.
Influence of Irradiation on the Mechanism of Crack Propagation During Creep
Infrared Sensing for Adaptive Arc Welding
Infrared sensing for on-line weld geometry monitoring and control
Infrared sensing for on-line weld process monitoring and control
Infrared sensing techniques for adaptive robotic welding
Infrared sensing techniques for penetration depth control of the submerged arc welding process
Infrared sensors for seam tracking in gas tungsten arc welding processes
Infrared thermography as a control for the welding process.
Infrared thermography for non-destructive monitoring of weld penetration variations.
Infrared thermography shows promise for sensors in robotic welding
Investigation on embrittlement of V-4Cr-4Ti alloy during fusion welding
Ion Implantation Effects on Fatigue Properties of Fe--13Cr--15Ni Alloys
Irradiation Creep of Previously Irradiated 304 Stainless Steel in a Fast Flux Environment
Landscape phage probes for Salmonella typhimurium.
Line Sensing of Weld Penetration Using Infrared Thermography
Low activation braze joint of dispersion-strengthened copper
Low-cost infrared sensing system for monitoring the welding process in the presence of plate inclination angle.
Magnetic-field tuning of the frequency and sensitivity response of a magnetoelastic biosensor
magnetoelastic resonance biosensor immobilized with polyclonal antibody for the detection of Salmonella typhimurium, A
Magnetostrictive ligand sensor
Mechanical Properties of Induction Brazed Glidcop Al-15
Micro-fabricated wireless biosensors for the detection of S. typhimurium in liquids
Miniaturized fatigue crack growth specimen technology and results
Monitoring GTA Weld Puddle Geometry Using Measured Surface Temperature Gradients
Multiple ion implantation effects on hardness and fatigue properties of Fe-13Cr-15Ni alloys
Multispecimen Fatigue Crack Propagation Testing
Nickel aluminide-copper backing for butt joint welding
Non-isothermal irradiation creep of nickel alloys Inconel 706 and PE-16
Observation of In-Reactor Endurance and Rupture Life for Fueled and Unfueled FTR Cladding
On-line identification and control of part-preparation and fixturing errors in arc welding
On line sensing of weld penetration using infrared thermography
On-Line Weld Position Control for Fusion Reactor Welding
Overview of Neutron Irradiation Effects in LMFBR Materials, An
Passive chemiresistor sensor based on iron (II) phthalocyanine thin films for monitoring of nitrogen dioxide
performance of a multi-sensor detection system based on phage-coated magnetoelastic biosensors, The
Phage-based magnetoelastic biosensor for the detection of @@iSalmonella typhimurium@
Phage-Based Magnetoelastic Wireless Biosensors for Detecting @@iBacillus Anthracis@ Spores
Phage-based magnetostrictive-acoustic microbiosensors for detecting Bacillus anthracis spores
Phage coated magnetoelastic micro-biosensors for real-time detection of Bacillus anthracis spores
Phage immobilized magnetoelastic sensor for the detection of Salmonella typhimurium
Point temperature sensing techniques for submerged arc welding
Prediction of Maximum Allowable Temperatures for Dry Storage of Zircaloy-Clad Spent Fuel in Inert Atmosphere
Preparation of PZT thin films on Hastelloy substrate using sol-gel processing
Processing and high temperature properties of refractory alloy single crystals
Processing of single crystals for high temperature applications
Radiation Induced Mechanical Stresses in Polycrystalline Alumina Insulators
Rail and insulator erosion in rail guns.
Rapid and sensitive biosensor for Salmonella
Rapid and sensitive magnetoelastic biosensors for the detection of Salmonella typhimurium in a mixed microbial population
Rapid Pressure Solidification in an Al--Si Alloy
Reactivity of refractory carbides with hot hydrogen
Real-time monitoring and control of weld penetration for submerged arc welding process
remote biosensor platform using sputtered magnetostrictive particles., A
sensing system for weld process control, A
Sequential detection of Salmonella typhimurium and Bacillus anthracis spores using magnetoelastic biosensors.
Special metallurgical welding considerations for refractory metals
Specific and selective biosensor for Salmonella and its detection in the environment.
Strength and Fatigue of Dispersion-Strengthened Copper
Stress modified welding of neutron irradiated steels
Stress modified welding process for irradiated materials
Study of Penetration Variations in Automated Gas Tungsten Arc Welding
Suppression of HAZ Cracking During Welding of Helium-Containing Materials
Technique to eliminate helium induced weld cracking in stainless steels
Time domain characterization of magnetoelastic sensors: A pulse method for resonance frequency determination.
Use of acacia gum to isolate and preserve a biological receptor on a biosensor
Use of Acacia Gum to isolate and preserve biological material
Use of pullulan to isolate and preserve biological material
Weldability of Low Activation Cr--W Steels, The
Welding of helium-doped austenitic and ferritic stainless steels
wireless biosensor using microfabricated phage-interfaced magnetoelastic particles, A
Zircaloy cladding rupture during repository storage
Contributed to or performed: 
Thesis (Ph. D.)--Dept. of Materials Science and Engineering, Stanford University, 1977