sort by
approximate search
1shortlisttitle datasearch history  
results search [or] ISN:0000000464773475 | 1 hits
Person
ISNI: 
0000 0004 6477 3475
Name: 
Gim, Wonho
김원호
金元浩
Creation class: 
text
Creation role: 
author
Related names: 
강병석 (co-author)
강용구 (co-author)
강윤희 (co-author)
강종원 (co-author)
강종협 (co-author)
강학수 (co-author)
강호영 (co-author)
공진우 (co-author)
공희진 (co-author)
곽광훈 (co-author)
김경태 (co-author)
김구니 (co-author)
김기재 (co-author)
김기현 (co-author)
김대식 (co-author)
김동성 (co-author)
김동원 (co-author)
김동현 (co-author)
김민영 (co-author)
김병민 (co-author)
김봉수 (co-author)
김부웅 (co-author)
김상권 (co-author)
김상균 (co-author)
김성호 (co-author)
김욱 (co-author)
김욱수 (co-author)
김유석 (co-author)
김재윤 (co-author)
김정수 (co-author)
김지홍 (co-author)
김진태 (co-author)
김태희 (co-author)
김희정 (co-author)
나동혁 (co-author)
노종대 (co-author)
도기원 (co-author)
마경남 (co-author)
민병선 (co-author)
박남 (co-author)
박득주 (co-author)
박민호 (co-author)
박선주 (co-author)
박성두 (co-author)
박성한 (co-author)
박종만 (co-author)
배종우 (co-author)
백정옥 (co-author)
백현종 (co-author)
변지영 (co-author)
서병호 (co-author)
손민진 (co-author)
손우정 (co-author)
송승구 (co-author)
송현우 (co-author)
스테판말지 (co-author)
신성식 (co-author)
신정은 (co-author)
안병현 (co-author)
여태민 (co-author)
오상택 (co-author)
유종선 (co-author)
윤정식 (co-author)
이광기 (co-author)
이누리 (co-author)
이동훈 (co-author)
이무정 (co-author)
이상대 (co-author)
이성민 (co-author)
이수경 (co-author)
이신득 (co-author)
이용훈 (co-author)
이정훈 (co-author)
이종엽 (co-author)
이진혁 (co-author)
이한백 (co-author)
전흥배 (co-author)
정경영 (co-author)
정경훈 (co-author)
정영민 (co-author)
정혜욱 (co-author)
조남주 (co-author)
조원제 (co-author)
조을룡 (co-author)
지상철 (co-author)
차길수 (co-author)
최성신 (co-author)
최영선 (co-author)
최일동 (co-author)
최준명 (co-author)
최흥환 (co-author)
하기룡 (co-author)
한민현 (co-author)
허재영 (co-author)
홍용우 (co-author)
황규석 (co-author)
황병선 (co-author)
황승철 (co-author)
황영훈 (co-author)
황태준 (co-author)
Titles: 
1,2,3‐triazole crosslinked polymers as binders for solid rocket propellants
1,2,3-트리아졸 폴리머의 상호계수 χ의 결정 = Determination of Interaction Parameter χ of the 1,2,3-Triazole Crosslinked Polymer
2층 연성동박적층판용 저흡습 폴리이미드의 합성 = Synthesis of the Low-Hygroscopic Polyimide for 2-Layer Flexible Copper Clad Laminate
A Low- Viscousity, Highly Thermally Conductive Epoxy Molding Compound (EMC)
Advanced underfill for high thermal reliability
Amine terminated polyetherimide/Epoxy 블렌드의 경화공정과 고강인성 복합재료에의 응용 = Curing Kinetics of Amine Terminated Polyetherimide/Epoxy Resin Blends and Its Application on the High Toughness Composites
Amine Terminated Polyetherimide/에폭시 수지 시스템의 경화공정연구와 파괴인성에 관한 연구 = A Study on the Curing Behavior and Toughness of Amine Terminated Polyetherimide/Epoxy Resin System
Bulky Side Group을 갖는 폴리벤즈이미다졸의 합성 = Synthesis of Polybenzimidazole Containing Bulky Side Group
Characterization of cure reactions of anhydride/epoxy/polyetherimide blends
Cure kinetics and mechanical properties of the blend system of epoxy/diaminodiphenyl sulfone and amine terminated polyetherimide-carboxyl terminated poly(butadiene-co-acrylonitrile) block copolymer
DGEBA/NMA/2,4,6-tris(dimethylaminomehyl)phenol 시스템의 경화거동 및 Morphology = Curing Behavior and Morphology of DGEBA/NMA/2,4,6-tris(dimethylaminomethyl) phenol System
Dispersion of functional tetraphenylporphyrin-ligated metal into ultra-thin flexible acrylate films : 1. Preparation of thin films
Dispersion of functional tetraphenylporphyrin-ligated metal into ultra-thin flexible acrylate films : 2. Oxygen-uptake properties
Effect of 3-aminopropyltriethoxysilane and N,N- dimethyldodecylamine as modifiers of Na+-montmorillonite on SBR/organoclay nanocomposites
Effect of nano zinc oxide on the cure characteristics and mechanical properties of the silica-filled natural rubber/butadiene rubber compounds
Ethylene-propylene-diene terpolymer (EPDM)와 itaconic acid의 melt grafting: 반응조건과 개시제 종류 및 농도의 영향 = Melt Grafting of EPDM and Itaconic Acid: Effect of Reaction Conditions and Initiator Type/Concentration
Ethylene Vinyl Acetate Copolymer 발포체의 발포특성 및 물리적 특성 = Foaming Characteristics and Physical Properties of Ethylene Vinyl Acetate Copolymer Foams
Ethylene Vinyl Acetate / Ethylene-1-Butene Copolymer 블렌드 발포체의 제조와 특성 = Preparation and Properties of Ethylene Vinyl Acetate/Ethylene-1-Butene Copolymer Blend Based Foam
Ethylene Vinyl Acetate / Styrene Vinyl Isoprene Styrene Triblock Copolymer 블렌드의 발포특성 = Foaming Characteristics of Ethylene Vinyl Acetate/Styrene Vinyl Isoprene Styrene Triblock Copolymer Blend
Fatigue Crack Growth Behavior of NR and HNBR Based Vulcanizates with Potential Application to Track Pad for Heavy Weight Vehicles
Interfacial Adhesion and Microfailure Modes of Electrodeposited Carbon Fiber/Epoxy–PEI Composites by Microdroplet and Surface Wettability Tests
Life-time Prediction of a Chloroprene Rubber (CR) O-Ring Using Intermittent Compression Stress Relaxation (CSR) and Time-Temperature Superposition (TTS) Principle
Methacrylic Acid가 도입된 Styrene-Butadiene Rubber를 기반으로 한 Ionic Elastomer 합성 = Synthesis of Ionic Elastomer Based on Styrene-Butadiene Rubber Containing Methacrylic Acid
Micromechanical 시험법을 이용한 전기증착된 탄소섬유 강화 Polyetherimide로 강인화된 에폭시 복합재료의 계면물성 평가 = Evaluation of Interfacial Properties on the Electrodeposited Carbon Fiber Reinforced Polyetherimide Toughened Epoxy Composites using Micromechanical Test
Modeling of Multi-Autocatalytic Cure Reactions of An Epoxy/Amine Terminated Polyetherimide/NMA System
Morphology and dynamic mechanical properties of styrene–butadiene rubber/silica/organoclay nanocomposites manufactured by a latex method
One-Shot법을 이용한 폴리우레탄계 유겔화제의 특성 = Oil Gelling Agents made from Polyurethane by One-Shot Method
Organoclay로 보강된 NR/BR Blends의 기계적 특성 = Mechanical Properties of Organoclay filled NR/BR Blends
Photopolymerization of thermoplastic polyurethane/acrylate blends
Poly(styrene‐r‐butadiene)‐b‐poly(poly(ethylene glycol) methyl ether methacrylate) as a silica dispersant in rubber compounds
Polyurethane Modified Epoxy Adhesives for the Application to FCCL
POST-DEPOSITION-ANNEALING-INDUCED ALIGNMENT OF COPPER PHTHALOCYANINE THIN FILMS UNDER UV IRRADIATION AND THEIR ELECTRICAL PROPERTIES
Silica/Carbon Black이 충전된 NR 가황물의 내Crack 및 내Cutting 특성 = Crack and Cutting Resistance Properties of Natural Rubber(NR) Compounds with Silica/Carbon Black Dual Phase Filler
Silica Filled Rubber Compound에서의 가교 촉진제 특성
Soft Segment 조성에 따른 PU 유겔화제의 합성 및 특성 = Synthesis and Characteristics of PU Oil-Gelling Agents According to the Soft Segment Content
The effect of peroxide crosslinking on thermal, mechanical, and rheological properties of polycaprolactone/epoxidized natural rubber blends
The properties of AlN-filled epoxy molding compounds by the effects of filler size distribution
Thermal fatigue-resistant EMCs (Epoxy Molding Compounds) for microelectronic encapsulation
Thermally conductive EMC (epoxy molding compound) for microelectronic encapsulation
Toughened 에폭시 수지를 사용한 탄소 섬유강화 복합재료의 충격파괴 거동 = Impact Fracture Behavior of Toughened Epoxy Resin Applied Carbon Fiber Reinforced Composites
Underfill용 액상 Epoxy Compound의 Filler 충진에 따른 Flow특성 연구 = Flow Properties of Liquid Epoxy Compounds as a Function of Filler Fraction for the Underfill
가교제 증량이 트레드용 실리카 컴파운드의 물성에 미치는 영향 = Physical Properties of the Silica-Reinforced Tire Tread Compounds by the Increased Amount of Vulcanization Agents
가스 배관 용접부 방식용 열 수축 쉬-트의 고무계 점착제 물성 = Properties of Pressure-Sensitive Rubber Adhesive in a Heat Shrinkable Sheet for the Protection of Welded Part of Gas Pipe Line
간헐 압축응력 완화와 시간-온도 중첩 원리를 이용한 FKM 오링의 수명 예측 연구 = Life-time Prediction of a FKM O-ring using Intermittent Compression Stress Relaxation (CSR) and Time-temperature Superposition (TTS) Principle
개질된 열가소성 고분자를 이용한 에폭시 수지 개발과 탄소섬유 복합재료에의 응용 = Development of epoxy resin with modified thermoplastic polymer and application to the carbon fiber composites
결정성 SiO<sub>2</sub> 충진 EMC(Epoxy Molding Compounds)봉지재의 성형조건 및 물성에 관한 연구 = Studies on Molding Conditions and Physical Properties of EMC(Epoxy Molding Compounds) fiiled with Crystalline SiO<sub>2</sub> for Microelectronic Encapsulation
결정성 실리카/질화 알루미늄 혼합충진에 따른 EMC의 물성 연구 = The study on the properties of binary mixture(crystalline silica/AIN) filled EMC(Epoxy Molding Compounds)
고무-실리카 네트워크용 계면 고분자 = Interfacial polymer for rubber-silica network
고무 컴파운드용 첨가제인 글리시딜 메타아크릴레이트 스티렌-부타디엔 고무 겔의 제조 방법 및 이를 이용한 트레드 컴파운드 = The process of preparing glycidyl methacrylate styrene butadiene rubber gel as an additive agent for rubber compound and tread compound using the gel
고체 추진제 바인더 및 그 제조방법 = SOLID PROPELLANT BINDER AND METHOD OF MANUFACTURING THE SAME
고충진 기술을 이용한 고방열성 EMC = High thermally conductive EMC(Epoxy Molding Compounds) using high filter loading technique
고흡유성 발포 폴리우레탄의 합성과 특성 = Synthesis and Characteristics of Highly Oil-absorptive Expanded Polyurethane
군용 전투차량 궤도 pads용 천연고무 배합물의 내크랙성 향상을 위한 연구 = Crock Resistance Properties of Natural Rubber Compounds for Tank Track Pads
다층 제진판의 제진성 연구 = A Study on the Vibration Damping of Multilayer Damping Sheet
라텍스법에 의한 천연고무-클레이 나노 복합재료: 모폴로지와 기계적 물성 = Natural Rubber-Clay Nanocomposites by Latex Method : Morphology and Mechanical Properties
런플랫 타이어 사이드월용 고무 보강재 조성물 = REINFORCEMENT COMPOSITION FOR SIDEWALL OF RUN-FLAT TIRE
미국의 고분자 관련 학과 및 학교 소개
반응성 고분자 계면상을 도입한 PP/탄소섬유 복합재료의 제조와 물성 = Fabrication of PP/Carbon Fiber Composites by Introducing Reactive Interphase and its Properties
반응성 열가소성 수지로 개질된 TGDDM/DDS 시스템의 Cure Kinetics = Cure Kinetics of amine-cured tetraglycidyl-4,4'-diaminodiphenylmethane epoxy blends with a new polyetherimide
벤질메타아크릴레이트 스티렌-부타디엔 탄성체로부터 금속-아이오노머를 제조하는 방법 및 금속-아이오노머를 포함하는 열가역성 탄성체 = A METHOD OF MANUFACTURING METAL-IONOMER FROM BENZYL METHACRYLATE STYRENE BUTADIENE ELASTOMER, AND THERMO-REVERSIBLE CROSSLINKING ELASTOMER COMPRISING THE METAL-IONOMER
변성 폴리에테르이미드의 합성과 이를 이용한 에폭시 수지의 강인화 = Synthesis of Modified Polyetherimide and Toughening of Epoxy Resin
산화방지제 종류에 따른 천연고무 배합물의 내열성 및 내크랙성 = Heat and Crack Resistance of Natural Rubber(NR) Compounds According to the Type of Antioxidants
상압 플라즈마 표면처리와 형태학적 조절에 의한 에폭시/폴리아미드/MPD 반응성 블렌드의 접착력 향상 = Improvement in Adhesion Properties of Epoxy/Polyamide/MPD Reactive Blends by means of AP Plasma Treatment and Morphological Tuning
실록산 이미드로 개질된 변성 에폭시 수지의 물성 = Properties of Epoxy Adhesive Modified with Siloxane-imide
아크릴로니트릴이 극성기로 도입된 유화중합 SBR/실리카 컴파운드의 기계적 물성 = Mechanical Properties of Acrylonitrile Functionalized Emulsion SBR/silica Compounds
열 수축 쉬-트용 점착제의 물성에 관한 연구 = Properties of pressure-sensitive rubber adhesives in heat shrinkable sheet
열가소성 액정고분자수지를 이용한 반도체 봉지재의 물성연구 = The Study on Properties of LCP(Liquid Crystalline Polymer) Compounds for Microelectronic Packaging Materials
열경화성 접착제 조성물 및 이를 이용한 접착 필름 = Thermosetting adhesive composition and adhesive film using thereof
유기화 클레이의 첨가가 실리카 및 카본블랙를 함유한 SBR 복합체의 동적 특성에 미치는 영향 = Effect of organoclay on the dynamic properties of SBR compound reinforced with carbon black and silica
유기화제로 3-aminopropyltriethoxysilane 을 이용하여 라텍스법으로 제조된 SBR/organoclay 컴파운드의 혼련 온도에 따른 팽윤도 및 기계적 물성 = Swelling Ratio and Mechanical Properties of SBR/organoclay Nanocomposites according to the Mixing Temperature; using 3-Aminopropyltriethoxysilane as a Modifier and the Latex Method for Manufacturing
유체압력(流體壓力)에 의한 Squeezed O-ring의 압착(壓着)과 초기(初期) 압출(押出) Mechanism = Pressurization and Initial Extrusion of a Squeezed O-Ring into a Clearance Gap
이미다폴(2E4MZ-CN) 촉매 첨가에 의한 에폭시/폴리아미드/MPD 반응성 블렌드의 경화 반응, 형태학적 특징 및 접착력 향상 연구 = Characterizations of Adhesion Property, Morphology and Cure Reaction of Epoxy/Polyamide/MPD Reactive Blend with Imidazole(2E4MZ-CN) Catalyst
전기중합법에 의한 열가소성 수지 탄소섬유 강화 복합재료의 제조와 내방사선성 = Radiation Resistance and Fabrication of Carbon Fiber Reinforced Thermoplastic Composites by Electropolymerization
초분자 네트워크를 이용한 열가역성 가교 탄성체 = Thermo-reversible Crosslinking Elastomer through Supramolecular Networks
촉매로서 금속 착화합물이 실리카가 충전된 에폭시-산무수물 복합체의 경화 거동 및 물성에 미치는 영향 = Effect of Metal Complexes as a Catalyst on Curing Behavior and Mechanical Properties of Silica Filled Epoxy-Anhydride Compounds
카본 블랙/유기화 클레이로 보강된 SBR 나노 복합재료: 모폴로지와 기계적 물성 = Properties of SBR Nanocomposites Reinforced with Organoclay/Carbon Black Dual Phase Fillers
탄소섬유 표면에의 고분자 전착과 복합재료 물성(I) - MVEMA와 EMA의 전착 - = Electrodeposition onto the Surface of Carbon Fiber and its Application to Composites(I) - Electrodeposition of MVEMA and EMA
탄소섬유 표면에의 고분자 전착과 복합재료 물성 (II) - MVEMA 및 EMA 계면상을 갖는 탄소섬유 복합재료 - = Electrodeposition onto the Surface of Carbon Fiber and Its Application to Composites (II) - CFRC with MVEMA and EMA Interphase -
Notes: 
Sources: