sort by
approximate search
1shortlisttitle datasearch history  
results search [or] ISN:0000000464778516 | 1 hits
Person
ISNI: 
0000 0004 6477 8516
Name: 
I, Hyeongil
이형일
李炯一
Creation class: 
text
Creation role: 
author
Related names: 
김낙수 (co-author)
김남호 (co-author)
김대현 (co-author)
김덕훈 (co-author)
김동욱 (co-author)
김동철 (co-author)
김민수 (co-author)
김범준 (co-author)
김영진 (co-author)
김용범 (co-author)
김주원 (co-author)
김충연 (co-author)
김태형 (co-author)
김하성 (co-author)
남승훈 (co-author)
리키펠릭스로버트 (co-author)
맹준수 (co-author)
문희욱 (co-author)
민형선 (co-author)
방성식 (co-author)
서윤미 (co-author)
서헌 (co-author)
서현 (co-author)
송원근 (co-author)
신성원 (co-author)
신수정 (co-author)
오중수 (co-author)
우상우 (co-author)
유한석 (co-author)
윤기봉 (co-author)
이경윤 (co-author)
이문규 (co-author)
이문섭 (co-author)
이배화 (co-author)
이영민 (co-author)
이진행 (co-author)
이태수 (co-author)
임동규 (co-author)
장훈 (co-author)
전용근 (co-author)
정재헌 (co-author)
조종두 (co-author)
최광선 (co-author)
최영식 (co-author)
최진용 (co-author)
최호승 (co-author)
한규헌 (co-author)
한병기 (co-author)
한준희 (co-author)
한태수 (co-author)
함종호 (co-author)
현홍철 (co-author)
황규민 (co-author)
황지훈 (co-author)
Titles: 
2중 성형에 의한 금속판재 딤플의 성형성 향상 = Enhancement of Dimple Formability in Sheet Metals by 2-Step Forming
3차원 유한요소해에 기초한 Berkovich 압입 물성평가법 = A Berkovich Indentation Technique Based on 3D FEA solutions for Material Property Evaluation
A 3D FE model for evaluation of peening residual stress under angled multi-shot impacts
A dual conical indentation technique based on FEA solutions for property evaluation
A numerical approach to spherical indentation techniques for material property evaluation
A simple but effective FE model with plastic shot for evaluation of peening residual stress and its experimental validation
Buckling sensitivity of a connecting rod to the shank sectional area reduction
C*에 기초한 3차원 고온균열 수명평가 = C* Based Life Assessment of 3D Crack at High Temperature
C^{ast}-적분에 기초한 고온배관 수명평가 = [ C^{ast} ]-integral Based Life Assessment of High Temperature Pipes
Cohesive Zone Model을 이용한 압입자 형상에 따른 균열특성분석 = Analysis of Cracking Characteristics with Indenter Geometry Using Cohesive Zone Model
Crack-tip field characterization of crack-tip opening angle-based crack growth-plane strain single-edge cracked specimen subject to pure extension
Crack-tip opening angle-based numerical implementation for fully plastic crack growth analyses
Decomposition of Interfacial Crack Driving Forces in Dissimilar Joints
Estimation of crack driving forces on strength-mismatched bimaterial interfaces
Fatigue life prediction of multi-spot-welded panel structures using an equivalent stress intensity factor
Interfacial crack-tip constraints and J-integral for bi-materials with plastic hardening mismatch
Interfacial crack-tip constraints and J-integrals in plastically mismatched bi-materials
J and CTOD Estimation for Homogeneous and Bi-Material Fracture Toughness Testing Specimens
J-T에 의한 3차원 반타원 계면균열선단 응력장의 기술 = J-T Characterization of Stress Fields Along 3D Semi-Elliptical Interfacial Crack Front
Laser pulsed welding in thin sheets of Zircaloy-4
Overload analysis and fatigue life prediction of spot-welded specimens using an effective J-integral
Overload failure curve and fatigue behavior of spot-welded specimens
The 3D surface crack-front constraints in bimaterial joints
결함해석에 기초한 배관용접부 수명평가 = Flaw Analysis Based Life Assessment of Welded Tubular Joint
경사충돌 피닝잔류응력에 미치는 해석인자의 영향 및 소성숏이 포함된 3차원 유한요소모델 = 3D FE Model with FEA Factors and Plastic Shots for Residual Stress Under Oblique Shot Peening
고강도 재료에 대한 구형압입 물성평가법 = Property Evaluation Method Using Spherical Indentation for High-Yield Strength Materials
고무 물성 평가 방법 = Method for evaluating material property of rubber
구속상태를 고려한 반타원 표면균열의 파손평가선도 = Failure Assessment Diagrams of Semi-Elliptical Surface Crack with Constraint Effect
구형 압입이론에 관한 고찰 = Some Remarks on the Spherical Indentation Theory
금속 판재 성형 방법, 이에 사용되는 선행 스탬핑 툴, 그리고 선행 스탬핑 툴 최적 설계 방법 = Metal plate forming method, pre-stamping tool of being used in the same, and optimal design method for the tool
금속재료 응력-변형률 곡선의 수학적 표현들 = Mathematical Expressions for Stress-Strain Curve of Metallic Material
나노소재 국부 고유 역학특성 평가를 위한 이론 / 실험 / 수치해석 융합기술 = Integrated approach of theory / test / numerical analysis for the characterization of intrinsic mechanical properties of nano-structured materials
다중경사충돌시 피닝잔류응력 평가를 위한 최적의 3차원 유한요소모델 = A Optimal 3D FE Model for Evaluation of Peening Residual Stress Under Angled Multi-impacts
다중충돌 피닝잔류응력 평가를 위한 소성숏이 포함된 3차원 유한요소해석 모델 = A 3D FEA Model with Plastic Shots for Evaluation of Peening Residual Stress due to Multi-Impacts
단순전단 시험법 구축 및 바우싱거효과를 고려한 경화거동 예측 = Development of Test Method for Simple Shear and Prediction of Hardening Behavior Considering the Bauschinger Effect
단일 숏 충돌시 피닝잔류응력 유일해를 위한 2차원 유한요소해석 모델 = A 2D FE Model for Unique Solution of Peening Residual Stress in Single Shot Impact
단일 숏 충돌에서의 잔류응력 유일해를 위한 2차원 유한요소해석 모델 = A 2D FE Model for a Unique Residual Stress in Single Shot Impact
동결챔버내의 열 흐름에 관한 실험 및 수치해석적 연구 = A Experimental and Numerical Studies of Thermal Flow Motion in a Geothermal Chamber
마이크로/나노 압입시험에 의한 재료특성평가 = Evaluation of Material Characteristics by Micro/Nano Indentation Tests
바우싱거 효과를 고려한 경화거동 예측 방법 및 시험 장치 = The prediction method of the curing behavior considering the bauschinger effect and test apparatus
박막 물성평가 압입시험의 수치접근법 = A Numerical Approach to Indentation Techniques for Thin-film Property Evaluation
변형 및 증분소성이론에 따른 압입특성 비교 = Comparison of Indentation Characteristics According to Deformation and Incremental Plasticity Theory
변형해석 및 공리적 설계에 의한 와이어 방전가공기의 설계평가 = Design Evaluation of WEDM Based on Deformation Analyses and Axiomatic Design
소성숏이 포함된 3차원 다중충돌 대칭-셀 해석모델을 이용한 면적평균 피닝잔류응력해 = Area-Averaged Solution of Peening Residual Stress Using a 3D Multi-impact Symmetry-cell FE Model with Plastic Shots
소재 물성평가를 위한 구형압입시험의 수치접근법 개발
슬롯밀링시험을 이용한 높은 변형률 속도 조건하에서 Zircaloy-4의 유동응력 결정 = Determination of Flow Stress of Zircaloy-4 Under High Strain Rate Using Slot Milling Test
압입 시험기 개발
압입시험의 천이 크리프 해석 = Transient Creep Analysis in Indentation Tests
압입이론에 의한 재료물성 평가에 관한 연구 = A Study on the Measurement of Material Properties Using Indentation Theory
엔진 커넥팅로드의 좌굴평가를 위한 유한요소법 및 실험방법 연구 = Analytical and Experimental Evaluation of Engine Connecting Rod Buckling
엔진 커넥팅로드의 좌굴평가에 대한 연구 = Study of Buckling Evaluation for the connecting rod of the engine
완전소성하 변형경화 이종접합재의 계면균열선단 구속상태 및 J-적분 = Interfacial Crack-tip Constraints and J-integrals in Plastically Hardening Bimaterials under Full Yielding
용접부 3차원 반타원 계면균열선단에서의 응력장 = 3D Semi-elliptical Interfacial Crack Front Stress Fields in Welded Joints
용접부 3차원 표면균열선단에서의 구속상태 = The 3D Surface Crack-Front Constraints in Welded Joins
유한선단반경을 갖는 원뿔형 압입자에 의한 영률평가 수치접근법 = A Numerical Approach to Youngs Modulus Evaluation by Conical Indenter with Finite Tip-Radius
유한요소해에 기초한 경화재의 비커스 압입파괴인성 평가방법 = Evaluation method of Vickers indentation fracture toughness in brittle materials based on FEA solutions
유한요소해에 기초한 물성평가 압입이론 = An Indentation Theory Based on FEA Solutions for Property Evaluation
유한요소해에 기초한 양축등가 잔류응력 평가 압입이론 = An Indentation Method Based on FEA for Equi-Biaxial Residual Stress Evaluation
유한요소해에 기초한 원뿔형 압입 물성평가법 = A Conical Indentation Technique Based on FEA Solutions for Property Evaluation
유한요소해에 기초한 이중 삼각뿔 압입 물성평가법 = A Dual Triangular Pyramidal Indentation Technique Based on FEA Solutions for Material Property Evaluation
유한요소해에 기초한 잔류응력 평가 압입시험기 = Indentation test system for residual stress evaluation based on FEA solutions
유한요소해에 기초한 취성재료의 압입파괴인성평가 = Evaluation of Indentation Fracture Toughens in Brittle Materials Based on FEA Solutions
유한요소해에 기초한 취성재료의 압입파괴인성평가 방법 = Evaluation method of indentation fracture toughness in brittle materials based on FEA solutions
인장시험과 유한요소해석으로 구한 파단 진변형률을 이용한 진응력-진변형률 선도 획득 = Acquirement of True Stress-strain Curve Using True Fracture Strain Obtained by Tensile Test and FE Analysis
재료물성 및 잔류응력 평가를 위한 향상된 압입이론 개발 = Development of Enhanced Indentation Theories for Evaluation of Material Property and Residual Stress
재료의 잔류응력 평가 방법 = Method for estimating residual stress of material
점 용접점 파단의 정량적 모델-1. 파단조건식 = An Estimative Model of Spot Weld Failure-1. Failure Criteria
점용접된 차량 안전벨트 앵커의 과부하해석 및 J_e에 의한 피로수명예측 = Overload Analysis and J_e Based Fatigue Life Prediction of Spot-Welded Auto Seat Belt Anchors
점용접시편의 과부하해석 및 유효 J-적분에 의한 피로수명예측 = Overload Analysis and Fatigue Life Prediction Using an Effective J-Integral of Spot Welded Specimens
점용접시편의 극한하중과 피로특성에 관한 실험적 고찰 = An Experimental Investigation of Limit Loads and Fatigue Properties of Spot Welded Specimens
정사각 모자형 박판튜브의 에너지흡수특성 및 최적 용접간격 = Energy Absorption Characteristics and Optimal Welding Space of Square Hat Type Thin-walled Tube
증분소성이론에 준한 새 압입이론 = A Novel Indentation Theory Based on Incremental Plasticity Theory
지르코늄 합금 박판의 레이저 용접 변형 예측방법 = METHOD OF PREDICTING LASER WELDING DISTORTION OF ZIRCALOY-4
차량 복합판형부품의 설계개선 기법들 = Design Enhancements for Automotive Integrated Shell Structures
천이크리프를 고려한 구형압입 크리프 물성평가법 = Spherical Indentation Techniques for Creep Property Evaluation Considering Transient Creep
초탄성 고무 물성평가를 위한 구형 압입시험의 수치접근법 = Numerical Approach Technique of Spherical Indentation for Material Property Evaluation of Hyper-elastic Rubber
초탄성고무 물성평가용 미소압입시험기의 소프트웨어 및 하드웨어 개발 = Software and Hardware Development of Micro-indenter for Material Property Evaluation of Hyper-Elastic Rubber
초탄성고무 물성평가용 미소압입시험법 개발 및 검증 = Development and Verification of Micro-indentation Technique for Material Property Evaluation of Hyper-elastic Rubber
크리프 물성평가를 위한 구형압입 수치접근법 = A Numerical Approach to Spherical Indentation Techniques for Creep Property Evaluation
항복강도 불일치 반타원 계면균열 선단에서의 응력장 = Stress Fields Along Semi-Elliptical Interfacial Crack Front with Yield-Strength-Mismatch
핵연료 지지격자 공정해석 및 설계 융합 시스템 개발 = Development of Integrated System of Process Analysis and Design for Nuclear Fuel Spacer Grid
핵연료 지지격자 성형을 위한 Zircaloy-4와 Zirlo 판재의 성형한계도 예측 = Forming Limit Diagrams of Zircaloy-4 and Zirlo Sheets for Stamping of Spacer Grids of Nuclear Fuel Rods
향상된 구형 압입 물성평가법 = Enhanced Spherical Indentation Techniques for Property Evaluation
향상된 구형압입 고무 물성평가법 = Enhanced Spherical Indentation Techniques for Rubber Property Evaluation
횡방향 하중을 받는 금속모재 복합재료의 파손구조 = Failure Mechanism of Metal Matrix Composites Subject to Transverse Loading
Notes: 
Sources: